| MACHINE SPECIFICATION |
|
| Machine Base |
Fine grain black granite |
| Dimensions and Weight |
54’’D X 34’’W X 76’’ H |
| |
(1.37 X 2.13 X 1.93 m) |
| |
Autoload - 24’’ (0.06m) overhang each side |
| |
for input/output conveyors |
| |
2800 lbs(1260 kg) |
| Power Input |
208-480 VAC, 3 phase |
| |
30A-15A, 50-60 Hz plus ground |
| |
Other power inputs available |
| Axis Positioning |
Split axis system |
| |
Table motion along the Y axis |
| |
Spindle carriage along X axis |
| Table/Carriage |
|
| Guide And Support |
Precision steel linear guides |
| Leadscrews |
Precision ground X, Y and Z |
| |
Recirculating pre-loaded ball screws |
| Position Accuracy |
+/ 0.0005’’(+/ 0.0127mm) |
| Position Repeatability |
+/ 0.0002’’ (+/0.0051mm) |
| Tooling Plates |
Phenolic with conductive foam and copper |
| |
Ground strip |
| Maximum Panel Size |
14’’ X 20’’ (356 X 508 mm) |
| |
|
| SPINDLE SPECIFICATION |
|
| Number of Spindles |
1 |
| Spindle Drive |
Belt driven, 1 hp variable from 3,000 to 24,000 RPM |
| Collets |
Pneumatically operated |
| Router Bit Sizes |
0.031’’-0.250’’ (0.79-6.35mm) |
| |
|
| CONTROL SYSTEM SPECIFICATION |
|
| Controller |
PMC-550, 32 bit Motorola 68040 processor |
| Data Input/Output |
3-1/2’’ Dos compatible floppy |
| Software |
PSOS |
| |
|
| OPERATING REQUIREMENTS |
|
| Ambient Temperature |
72 degrees +/ 2 degrees F |
| |
(22 degrees +/ 1 degree C) |
| Ambient Humidity |
45-60% RH |
| Air Input |
105-150 psig at 23 scfm flow |
| |
( 7.4-10.5 kg/cm2 at 651 l/min |
| |
Filtered to better than 0.01 microns |
| |
99.99% free from oil and water |
| Debris Vacuum Requirement |
240 scfm at 41 inches of water |
| |
(6796 l/min at 1041mm of water) |
| |
|
| OPTIONS |
|
| |
9 Position automatic tool changer |
| |
Status Light |
| |
Stripper Plate |
| |
Inline Autoloader |
| |
Bar Code Reader |
| |
|
Excellon 105DP - Product Specs
Close this window